Even those who do not understand how to use gynecological beds can be known according to the practice of medical units in the use of equipment and equipment. These devices need to be cleaned and disinfected frequently in use. So how should the device clean and disinfection work? First, when cleaning and disinfection for gynecological beds, everyone should pay attention to using a weak alkaline cleaner containing surfactants and phosphate to clean the equipment and its accessories. The reason why there is such a specific requirement in the use of detergents is to ensure good cleaning effect on the one hand, on the other hand, to protect the equipment and avoid the material related to the device related structure due to the corrosion effect of the detergent. Damage.
Second, in terms of cleaning and disinfection of gynecological beds, everyone should use surfactants with acetaldehyde -containing groups to disinfect the equipment after dilution as required, so as to achieve a better disinfection effect. Protect the equipment. Otherwise, if you use chlorine, chlorine -containing compounds and ethanol mixtures to disinfect gynecological beds, it will cause the technical surface of the equipment to be corroded, which will not only affect the performance of the material but also affect the surface of the equipment. Third, in terms of cleaning and disinfection of gynecological beds, everyone should pay attention to avoid using cleaning agents and water spraying or rinse the base. Otherwise, it may be due to the impact of water, which causes short -circuit damage to the electrical control system near the base, and the parts rust of the parts and components. Failure.