Gynecological beds are mainly used for gynecological examinations, diagnosis and treatment, and delivery of pregnant women, so they have high requirements in terms of structure and performance. To ensure the quality of the bed first installation quality. The installation process of gynecological beds: First of all, you need to install the bed racks and mattresses and other parts. The screws on all bed frames must be tightened to prevent the screw from falling off during the surgery. Check the segmented adjustment of the bedmeal to see if its range is normal and reasonable or meets the requirements. At the same time, the leg board should also be adjusted to an appropriate height. For some regulation, the adjustment of this part can be determined according to the required angle of the inspection items. The best angle required for different projects should be more attention when adjusting. It can be adjusted to the lowest; the last is to put the mattress well and check whether the bed is stable. If it is unstable, check it.
After inspection or surgery, the gynecological bed must be cleaned in time. The placement of the stains and blood stains needs to be increased, and the cleaning process is cleaned before disinfection treatment. Essence