The main constituent mechanism of the electric surgery is an electric hydraulic body, and then equipped with a suitable controller, adjusting the valve active control valve and other control equipment to work. By the rotation of the hydraulic gear provides power, it is used to control the two-way hydraulic cylinders of different parts to perform reciprocating motion, and then use the handle button to control the various positions of the operating bed. The electric surgery bed is mainly divided into two large systems: hydraulic systems and circuit systems.
The structure of the hydraulic system is compared, the size is small, and the control is relatively smooth, easy to install, especially for the quality of the light surgery bed. A good electric surgery is particularly small, specially suitable for highly tight environments in surgery. Hydraulic systems mainly include: fuel tank, cylinder, motor, solenoid valve, pressure gauge, relief valve, throttle valve, and storage equipment.
The capsule storage capacity is the source of power. It is necessary to release energy during the necessary time; can observe the pressure and automatic coordination of pressure at any time according to the pressure gauge; the motor is a driving device to work. There is a microprocessor in the circuit system, controlling the various parameters of the hand bed. The microprocessor is connected to the implementation portion of the motor and hydraulic system through the control drive portion.